The line of mills with a 350mm die is likely the best bang for your buck. The sales figures confirm it. Roughly 2/3 of my sales are for one of the 350mm mills. It is the smallest mill that can be ordered with a “heavy duty” option. It can be considered for a small commercial operation. The ATFP350T is an unpowered pellet mill with a 350mm die. The holes in the die can be pretty much whatever size you would like. It is designed to be powered by a 550 rpm PTO from a tractor. It is not designed to be run by a motor or engine. It is rated at 880 to 1200 lbs per hour of production depending on the type of material you want to pelletize. Wood is much more difficult to use than grasses or grains and should not be used as a feed stock for this mill. It will require a tractor with at least 30-40HP available at the PTO. This mill comes complete with the Jack Shaft but you will have to construct your own 3 point hitch and likely as not the PTO U joint will need a different spline coupling due to the difference between US and Asian tractors. This mill weighs 992 Lbs and its dimensions are 31 x 29 x 53 inches. Spare Die is $350 Spare Roller assy is $418. Figure on changing the die and roller every 1600 hours of operation for wood pellets, but rocks, bolts etc. can damage them beyond use, so I recommend you keep a set of spares.
$2458.00 Plus shipping