This is the ATFP350EC, it is shown with the optional conditioner and electrical control panel. It is an electrically powered pellet mill with a 350 mm diameter die, the holes in the die can be pretty much whatever size you would like. It is designed to be powered by a 1500 to 1700 rpm electrical motor. If I supply the motor it will be a 30 KW 3 phase motor but you can decide what voltage you need. In fact you can buy this mill without any motor and supply your own. It is rated at 880 to 1200 lb per hour of production depending on the type of material you want to pelletize. Wood is much more difficult to pelletize than grasses or grains. In fact this mill is not even rated to use wood as a feed stock because it is so difficult to make into pellets. It will require a motor with a continuous power rating of 30 KW or more. It weighs 1650 Lb and its dimensions are 71X30X70 inches. Spare Die is $245 Spare Roller assy is also $350. Figure on changing the die and roller every 1600 hours of operation for good clean material but rocks, bolts etc. can damage them beyond use, so I recommend you keep a set of spares..
Price as shown with Mill, Motor, Electric Control Panel and Conditioner
$4929.00 Plus shipping