ATFP350E FEED PELLET MILL FOR SALE

 

ATFP350E

 

This is the ATFP350E, It is an  electrically powered  pellet mill with a 350 mm diameter die, the holes in the die can be pretty much whatever size you would like. It is designed to be powered by a 1500 to 1700 rpm electrical motor. If I supply the motor it will be a 30KW 3 phase motor but you can decide what voltage you need. In fact you can buy this mill without any motor and supply your own.  It is rated at 880 to 1200 lb per hour of production depending on the type of material you want to pelletize. Wood is much more difficult to pelletize than grasses or grains, in fact so much so that I don’t recommend you even try making wood pellets with it. This is a great little mill for making animal feed pellets. It will require an electrical motor with a continuous power rating of 30 KW or more. It weighs 1650 Lb and its dimensions are 71X30X70 inches. Spare Die is $245 Spare Roller assy is also $350. Figure on changing the die and roller every 1600 hours of operation for good clean material, but rocks, bolts etc. can damage them beyond use, so I recommend you keep a set of spares on hand if you are going to use this mill on a regular basis.

$3727.00 Plus shipping

ATFP350E-bare without motor
ATFP350E-bare without motor

ATFP350E-Bare No Motor

 The Bare unit comes with a 4 belt pulley which you can’t see in this photo, It also has a beefy bearing to withstand the side load of a pulley driven power source. With this mill you can connect your own power source. You will need at motor capable of producing 40hp continuously. Most internal combustion motors are rated in Maximum horse power, so be careful when choosing a motor.

 $2841.00 Plus shipping

 

$3727.00 Plus shipping

Leave a Reply

Your email address will not be published.

thirteen − 4 =