The ATFP250E is an electrically powered  pellet mill with a 250 mm diameter die, the holes in the die can be pretty much whatever size you would like. It is designed to be powered by a 1500 to 1700 rpm electrical motor. If I supply the motor it will be a 11KW 3 phase motor but you can decide what voltage you want.  It is rated at 440 to 660 lb per hour of production depending on the type of material you want to pelletize. Wood is much more difficult to pelletize than grasses or grains and should NOT be used with this mill. It will require an electrical motor with a continuous power rating of 11KWor more. It weighs 992 Lb and its dimensions are 45x19x49 inches. Spare Die is $147 Spare Roller assy is $133. Figure on changing the die and roller every 1600 hours of operation, but rocks, bolts etc. can damage them beyond use, so I recommend you keep a set of spares.


$2373.00 Plus shipping

You can also order this model as the ATFP250E-Bare. It doesn’t come with the motor or electrical control box. The idea being that you will use your own electric motor to drive it. The dimensions are 22 X 19 X 49 inches. The weight is reduced to 792 LBS.

$1799.00 Plus shipping.

Leave a Reply

Your email address will not be published.

two + fifteen =