BULK MATERIAL DRYERS FOR SALE

Dryers

Known as flash driers or pipe dryers, these driers are very simple and very efficient. If you are looking for perfect welding, and no drip paint, these are not for you….. LOL these driers are the least expensive to make and least expensive to operate dryers I can build. That means No Frills. They fire wood in a furnace and a big old fan creates a powerful draft and a hot flame and drags the heat, smoke and material through what is essentially a long chimney horizontally through the fan and blown into a cyclone separator. None of this is very fancy, what it is is inexpensive and effective.

  • ATSD-I


    $3565.00 plus shipping.   Plus shipping. 

     This is this a very simple, very inexpensive, highly efficient sawdust dryer model ATSD-I. It is used to dry up to 660 lbs/hr of sawdust with up to 30% moisture content to the 15% moisture content usually required to make wood pellets. The sawdust must be relatively well ground and consistent in particle size. The particles are suspended in mid air momentarily as they move through the vertical chambers by a hot stream of air from the included furnace which uses firewood as fuel. This is much more economical than burning coal, oil, or natural gas for heat. This dryer makes a great compliment for use with a small hammer mill and pellet mill.

    This item will be built to order for you and can be delivered to your export broker, or I can handle the entire process for you with my shipper/broker. Plan on about $1300 to ship this item to most US port locations. I can get a more specific price for shipping if you will e-mail me with your address.

    .

  • ATSD-2

      

    $3880 plus shipping Plus shipping.

        This is the inexpensive, highly efficient sawdust dryer model ATSD-II.It is used to dry up to 880 lbs/hr of sawdust with up to 30% moisture content to the 15% moisture content usually required to make wood pellets. The sawdust must be relatively well ground and consistent in particle size. The particles are suspended in mid air momentarily as they move through the vertical buffering chambers by a hot stream of air from the included furnace. The furnace uses a portion firewood as fuel. This is much more economical than burning coal, oil, or natural gas for heat. This dryer makes a great compliment for use with a small hammermill and pellet mill.

        This item will be built to order for you and can be delivered to your export broker, or I can handle the entire process for you with my shipper/broker FedEx trade. Plan on about $1600 to ship this item to most us locations. I can get a more specific price for shipping if you will e-mail me with your address.

 

  • ATSD-3

  • ATSD-3

    $4400.00 Plus Shipping

     Plus shipping.

        This is the inexpensive, highly efficient sawdust dryer model ATSD-III. Don’t be fooled. The photograph is of an incorrectly assembled dryer but it seems to work just as well anyway. The Buffer tubes which are lager than the connector pipe should have the flow of sawdust and air flowing skyward but somebody forgot to tell the sawdust. This mill won’t work as displayed. But I don’t have a correct one now, so the correct photograph will have to wait. It is used to dry up to 1200 lbs/hr of sawdust with up to 30% moisture content to the 15% moisture content usually required to make wood pellets. The sawdust must be relatively well ground and consistent in particle size. The particles are suspended in mid air momentarily as they move through the vertical buffering chambers by a hot stream of air from the included furnace. The furnace uses a portion of the sawdust, logs, limbs or biomass as fuel. This is much more economical than burning coal, oil, or natural gas for heat. This dryer makes a great compliment for use with a small hammermill and pellet mill.

        This item will be built to order for you and can be delivered to your export broker, or I can handle the entire process for you with my shipper/broker. Plan on about $1600 to ship this item to most us locations. I can get a more specific price for shipping if you will e-mail me with your address.

 

  • ATSD-4

    $5800.00 plus shipping Plus shipping.

        This is the inexpensive, highly efficient sawdust dryer model ATSD-IV. It is used to dry up to 2000 lbs/hr of sawdust with up to 30% moisture content to the 15% moisture content usually required to make wood pellets. The sawdust must be relatively well ground and consistent in particle size. The particles are suspended in mid air momentarily as they move through the vertical buffering chambers by a hot stream of air from the two included furnaces. The furnaces use firewood as fuel. This is much more economical than burning coal, oil, or natural gas for heat. This dryer makes a great compliment for use with a small hammer mill and pellet mill.

        This item will be built to order for you and can be delivered to your export broker, or I can handle the entire process for you with my shipper/broker FedEx trade. Plan on about $2600 to ship this item to most us locations. I can get a more specific price for shipping if you will e-mail me with your address.


  • ATRSD-V

    ATRSD-V

    This rotary dryer is a complete drying system, including the belt conveyor, sieve and screw conveyor as shown. The drying capacity is around 2000 to 4000 KG/H.. It uses wood branches and firewood for fuel for the furnace to generate the needed heat.

    The amount of material you can dry with this dryer is controlled by the angle of the drum. This allows you to put more material through if you need less moisture removed. Also this design allows you to dry material in excess of the 50% limit for the pipe dryers and to do so in one pass.

    It is a large machine. dimension: 18*1.5*5 Meters Weight: 6 MT.

These types of dryers are very simple devices. Eventually I will redesign the furnaces to run on pellets. That will allow better burn duration and better control of the BTU’s being put out by the furnace. But I am not there yet. Stay Tuned.

To email me click HERE.

 $28,385.00 USD Plus Shipping

 

Leave a Reply

Your email address will not be published.

twenty + four =